❄️ AC Units: Keeping You Cool and Comfortable 🌡️
Split Type AC Unit
Consists of two main parts: the outdoor unit and the indoor unit. Outdoor unit is installed on or near the wall outside of the room that you wish to cool, it houses the compressor, condenser coil and the expansion coil or capillary tubing. The indoor unit contains the cooling coil, a long blower and an air filter.
Window Type AC Unit
In this air conditioner all the components, namely the compressor, condenser, expansion valve or coil, evaporator and cooling coil are enclosed in a single box.
Floor Standing AC Unit
These fan coil units are located indoor. The outdoor unit or condensers are located outside the building where the heat is rejected through the vapor compression cycle.
Heat Recovery Unit captures waste heat discharged from an Air Conditioning or Heat Pump system, and transfers that heat into a water heater tank, thereby creating low cost hot water for domestic use.
Operation depends on configuration, but packaged systems typically heat and cool your home the same way their stand-alone counterparts do. The ducting with a single cabinet system is slightly different. The duct work is attached to the system rather than connecting to various components in your home.
Air Handling Units
A large metal box containing a blower, heating or cooling elements, filter racks or chambers, sound attenuators, and dampers. Air handlers usually connect to a duct work ventilation system that distributes the conditioned air through the building and returns it to the AHU.
Ducted Split Unit
A split-system central air conditioner has 3 components: an outdoor metal cabinet that contains the condenser and compressor. an indoor cabinet that contains the evaporator coil. an air handler, that in most cases is part of the furnace, that sends the cool air through the duct system.
Fan Coil Unit
A fan coil unit (FCU) is a simple device consisting of a heating and/or cooling heat exchanger or 'coil' and fan. It is part of an HVAC system found in residential, commercial, and industrial buildings.
Window air conditioner brackets are equipment use to provide support for your air conditioning units. It is a metal brace that can carry the weight of AC unit.
AC Washing Cover
Cleaning bag for washing split air conditioner indoor unit, collecting drain water and dust after washing A/C indoor unit,making the cleaning of AC unit, fan coil unit easy, fast and high efficient.